Midas LEGEND 3000 Operator's Manual page 36

The MATRIX SEND rotary controls (1
to 8) give continuous adjustment of the
levels sent from the group outputs to the
matrix busses. The level adjustment is
from + 6dB to off.
The LEFT/RIGHT rotary controls give
continuous adjustment of the levels sent
from left and right master outputs to the
matrix busses. The level adjustment is
from + 6dB to off.
The CENTRE (mono) rotary control
gives continuous adjustment of the
levels sent from the mono master output
to the matrix busses. The level
adjustment is from + 6dB to off.
The matrix LEVEL control gives
continuous adjustment of output levels
from +10dB to off.
0 0
+6 +6
2
1
0
0
+6
+6
4
3
0
0
+6
+6
6
5
0 0
+6
+6
8
7
0
0
+6 +6
r
l
0
0
+6 +6
ext
c
0
MUTE
+10
SOLO
mtx 1
26
The EXT input control gives continuous
adjustment of the direct input level from
+6dB to off. The signal is summed on to
the matrix bus.
The MUTE switch mutes the matrix post
level control signals. The switch can be
controlled from snapshot automation.
The SOLO switch sends matrix signals
to the MON PFL/AFL busses and the
FOH PFL/AFL stereo busses. If the
switch is pressed for a short time it will
latch on or off, but, if it is held on for
more than 1 second the latching is
disabled and when the switch is released
the channel solo will turn off. As a
default the solo system is auto cancelling
so each new solo cancels the last. The
SOLO ADD mode switch on the master
module defeats the auto cancelling and
allows multiple channel monitoring.