Midas LEGEND 3000 Operator's Manual page 15

The AUX controls (1 to 12) give
continuous adjustment of the level sent
from the input channel to the aux busses.
The level adjustment is from + 6dB to
off. All aux busses can be globally
assigned to derive signals from the FOH
signal path or MON signal path. The
switch to do this is located on the mix
output module.
The aux PRE switches change the signal
sent to the aux busses from post fader to
pre fader and this is confirmed by a led
colour change on the bus routing LEDs.
0
0
+6
+6
1
2
PRE
0
0
+6
+6
3
4
PRE
0
0
+6
+6
5
6
PRE
0
0
+6
+6
7
8
PRE
0
0
+6
+6
9
10
PRE
0
0
+6
+6
11
12
PRE
5
Aux send ON/OFF switching is
achieved using the console assignment
system. A routing LED below the aux
control provides indication of status,
RED being POST fader and GREEN
being PRE fader. The assignments may
also be stored as part of a snapshot scene.