Midas LEGEND 3000 Operator's Manual page 55

Setting The Console To Respond To MIDI Changes:
The console may be programmed to recall scenes when receiving either MIDI Program Changes, Note On or Note
Off messages. The protocol you wish console to respond to may be selected using the following method:
Note : To access this menu you must be in 'SYS' Lock Mode.
Enabling The Console To Respond To MIDI:
1/ Press the SYSTEM menu switches and scroll down to AUTO, press CONFIRM.
2/ Scroll to ENAB -(ENABle). This is the master switch for this function and can be set to "YES" or "NO".
This must be set to YES if you wish the console to respond to MIDI Messages. Toggling this to NO will not
delete the MIDI IN parameters already programmed into scenes but the console will not respond to MIDI.
Selecting The MIDI Protocol You Wish The Console To Respond To:
1/ Press the SYSTEM menu switches and scroll down to AUTO, press CONFIRM.
2/ Scroll to SETP - (SETuP). This is where the MIDI parameters that are used for this function on set. These
parameters define the midi command that the console will respond to, and decode the required Act/Scene
number. The four parameters that can be set are as follows:
N ON - (Note ON)
NOFF - (Note OFF)
SNGP - (SoNG Pointer)
PRCH - (PRogram CHange)
Choose the required protocol and press CONFIRM.
3/ The display will then show Ch01, select the MIDI channel you require the console to respond to (Between
Ch01 and Ch16). Select the required Channel and press CONFIRM. You will be dropped out of the menu
and the console will now be ready to respond to MIDI messages. As default, scenes are not set with MIDI
information and must be programmed individually.
NOTE:
To respond to an external MIDI request to change the Act/Scene number, the following conditions must be
true:
a. The "AUTO - ENAB" menu setting must be set to "YES" and the relevant Protocol chosen.
b. The console must not be in "TOTL" (TOTaL) Lock-Mode.
c. The console must not be performing any menu operations.
d. The Scenes must be programmed with the MIDI message to respond to.
45