Mon Eq - Midas LEGEND 3000 Operator's Manual

MON EQ

The hi mid FREQ. control gives
continuous adjustment of the frequency
range that the hi mid equaliser acts on
from 400Hz to 16KHz.
The lo mid FREQ. control gives
continuous adjustment of the frequency
range that the hi mid equaliser acts on
from 50Hz to 2KHz.
The MON EQ switch connects the
equaliser into the monitor signal path
including any sections assigned to it
from the front of house EQ.
The insert defaults to be pre EQ but the
insert POST (FOH only) switch changes
the insert position to be post the front of
house EQ (i.e. it will not act upon
monitor signals).
1k 4k
hi-mid 2
0
400 16k
-6
250 400
+15
-15
lo-mid 2
0
50 2k
monitor
-6
EQ
-15 +15
insert post
only
FOH
4
The HI MID control gives continuous
adjustment of boost and cut from + 15dB
to - 15dB with a 0dB centre detent.
The LO MID control gives continuous
adjustment of boost and cut from + 15dB
to - 15dB with a 0dB centre detent.