Table of Contents
Advertisement
The system menu contains LOCK which
defines the level of console operation.
These levels are: -
TOTL All automation and
assignment functions are disabled
A-LK All assignments work but
automation is dissabled.
RCAL Only recall and assignment
functions are available.
STOR Scene storage/editing, recall
and assignment are operational
SYST All functions are available.
The COPY, DELETE and INSERT keys
allow the operator to edit the snapshot
sequence in the following manner:-
INSERT. Pressing this key will allow
the operator to insert a snapshot at the
number on the numeric display. The
scene that was originally at the number
and all con-current scenes will be re-
numbered by adding one to their scene
numbers.
DELETE will erase the snapshot that is
currently being displayed on the
numeric display from the automation
memory.
COPY. This will copy the snapshot
currently displayed on the numeric
display to a temporary memory
location. This can then be stored or
inserted to a new scene number in the
normal fashion.
lock
s-i-p
active system
(hold 3secs)
a
b
store
midi
system
insert
delete copy
check
cancel
confirm
act
scene
act/scene
down
up
c/o
last
now
next
29
The SYSTEM switch gives the operator
access to the system menu. Navigation
of the menu is achieved by using the
UP/DOWN switches to select an entry
and then pressing CONFIRM to execute
the selected function or sub menu. To
exit a menu or sub menu press
CANCEL.
The CHECK switch provides a preview
of the input module MUTE STATUS for
any of the snapshot screen WITHOUT
recalling the ACTUAL setting to the
console surface (mutes are displayed on
the ASSIGN LEDs so that the current
mute status is always present and
accurate). Whist in check mode the
ACT/ SCENE C/O, and UP/DOWN
switches can be used to step through the
snapshots.
CONFIRM and CANCEL are used to
enter or exit functions or sub menus.
Hide quick links:
Advertisement
Table of Contents
