To Stop Scanning/Printing - Konica Minolta bizhub PRO 950 User Manual

Before Making Copies
8.5

To Stop Scanning/Printing

Follow the procedure below to stop the job currently in process (scanning,
printing, or both scanning and printing).
To stop scanning/printing
0 This procedure is effective only for the job in progress. To stop reserved
jobs on standby, operate on the Job List Screen. See page 12-3 for de-
tails.
1
Press [Stop] on the control
panel while the current job is
in progress.
– With the popup menu
displayed right after
pressing [Start] for scan-
ning the original of re-
serve job, the current job
cannot be canceled even
though [Stop] is pressed.
According to the proce-
dure on page 8-20, touch
an appropriate key on the popup menu to clear it.
The current machine operation of the selected job will be suspended,
and the popup menu will be displayed on the Copy Screen.
2
Touch the desired key on the popup menu.
– The popup menu will vary according to the job in progress.
bizhub PRO 950
8
8-17