Rear Panel - Hand Held Products Dolphin 9550 User Manual

Charge/Analyze Slot
This is the fourth slot and the only one that can be used to analyze a battery. When a battery is placed in this slot, it
begins charging just as it does in the other three slots. However, if you press the ANALYZE button, it runs the battery
in this slot through the complete Analyze cycle. For more information, see
Battery Capacity Indicator LEDS
These LEDs give a readout of the remaining battery capacity after it has run through a complete analyze cycle. For more
information, see
Analyze Button
Press this button to start a battery analyze cycle. For more information, see
Status LEDs
A status LED is located above each of the four battery slots. The color of the LED indicates the charge status of the
batteries in its slot.
Status LED color
Green
Orange
Red

Rear Panel

Power Switch
Toggle the power switch to turn the QuadCharger on and off.
Power Supply Connector
Use this connector to attach the power supply to the QuadCharger. The universal power supply accepts input voltages
between 90-265 volts.
13 - 2
Battery Capacity Indicator LEDS
This color indicates that the battery in the slot...
Has completed its charge cycle and is ready for use.
Is being charged at a maximum charge rate.
Encountered an error during the most recent charge cycle.
Status LED
Using the Battery Analyzer
on page 13-2.
Power Switch
Power Supply Connector
Dolphin® 9500/9550 Mobile Computer User's Guide
Using the Battery Analyzer
on page 13-4.
on page 13-4.