Mounting The Homebase; Desk Mounting; Wall Mounting - Hand Held Products Dolphin 9550 User Manual

Mounting the HomeBase

Set the Dolphin HomeBase on a dry, stable surface, such as a desktop or workbench near an electrical outlet. Be sure to provide
enough workspace with good lighting for the user to view and operate the Dolphin terminal while it is in the HomeBase.
When choosing a location, bear in mind that:
• the mounting location must allow users easy access to the Auxiliary Battery Well, and
• the serial and USB ports as well as the power jack face straight out of the rear panel, and you will most likely want easy access
to them in the future.

Desk Mounting

Dolphin charging/communication cradles have a DIN rail (7.5 X 35 mm) slot on the bottom to allow for secure desk attachment
of the unit if desired.
Serial and USB port location (not in view)
Auxiliary Battery Well
DIN Rail (7.5 X 35 mm)
To mount the HomeBase, you slide the DIN rail slot along the bottom panel and secure it. Then, using the appropriate nuts and
bolts, secure the DIN rail to the desk or flat surface.

Wall Mounting

A wall mount kit that contains a screws and a mounting bracket can be purchased separately.
Please be advised that the bottom panel of the HomeBase contains four rubber feet - one at each corner - that help keep it stable
and secure when resting on a flat surface. Those rubber feet should be removed with pliers before wall mounting the HomeBase.
Dolphin® 9500/9550 Mobile Computer User's Guide 10 - 13