Dolphin Chargebase Parts And Functions; Front Panel; Back Panel - Hand Held Products Dolphin 9550 User Manual

Dolphin ChargeBase Parts and Functions

Front Panel

Terminal Wells
The ChargeBase contains four terminals wells. Each well
• Holds and charges the main battery pack of one Dolphin 9500/9550 terminal.
• Contains the companion to the industrial-grade, 17-pin connector on the bottom panel of Dolphin 9500/9550
terminals.
• Has two LEDs on the front: the Dock LED and the Charge LED.
Dock LED
Each terminal well displays a Dock LED on the front that lights solid green when a terminal is properly seated, which
means that the terminal and the base are connected.
Charge LEDs
Each terminal well displays a Charge LED on the front that lights green to indicate charging. For details, see
Terminals in the ChargeBase

Back Panel

Power Supply Connector
This connector receives input from the power adapter. Plug the power connector cable from the power adapter into this
connector.
Note: There is no ON/OFF switch on the back panel of the ChargeBase. The power switch is on the power adapter.
12 - 2
Terminal Wells
Dock LED
Charge LED
on page 12-5.
Power Supply Connector
Dolphin® 9500/9550 Mobile Computer User's Guide
Charging