Using Infrared; Verify That The Irda Port Is Enabled - Hand Held Products Dolphin 9550 User Manual

Using Infrared

Dolphin 9500/9550 terminals contains infrared or IrDA ports on the left side panel (see IrDA Port on page 3-8). Using these ports,
you can send and receive data between the terminal and other devices equipped with infrared. This can include, but is not limited
to, Pocket PC information such as Contacts and Tasks, as well as software upgrades.

Verify That the IrDA Port is Enabled

The IrDA port must be enabled to transmit data. By default, the IrDA port is assigned to com port 6 and is enabled. It can be
disabled to free up a com port.
Verify that the IrDA port is enabled before attempting to transmit data via infrared. Go to Go to Start > Settings > System tab >
IrDA Config.
Dolphin® 9500/9550 Mobile Computer User's Guide 6 - 5