Using The Mounting Brackets - Hand Held Products Dolphin 9550 User Manual

Using the Mounting Brackets

A wall mount kit can be purchased separately. It contains two mounting brackets to secure both ends of the ChargeBase.
Use the screws and the mounting brackets to mount the ChargeBase to a wall or other vertical surface. Each mounting bracket
contains an open slot in the back to accommodate the connector cables.
The bottom panel of the ChargeBase contains rubber feet that hold it steady on a flat surface. Those rubber feet need to
be removed prior to applying the mounting brackets to the bottom panel. Pliers are recommended.
1. Secure the screws into the four screw slots on the bottom panel. Insert the heads into the round end and slide towards the
narrow end until the screw is secure.
2. Attach the bottom panel to the two mounting brackets.
Open Slot for Connector Cables
12 - 8
Screws in slots
Mounting Brackets
Nuts and Bolts
Dolphin® 9500/9550 Mobile Computer User's Guide