Hand Held Products Dolphin 9550 User Manual page 102

If the File is Not an Installer:
5. An error message appears stating that the program is valid but designed for a different type of computer. You need to
manually transfer this file to the terminal.
6. If you cannot find any installation instructions for the program in the Read Me file or documentation, open ActiveSync and
click Explore.*
7. Navigate to the My Pocket PC folder and copy the program file or files to the Program Files folder on the terminal.
• If you want the program to be part of the Autoinstall that occurs after every hard reset, place the program file in the
Autoinstall folder (My Pocket PC > IPSM > Autoinstall).
8. Depending on the program, you may need to open File Explorer on the terminal, navigate to the folder where the program is
located, and tap on the program file to install it.
• If you copied the file to the Autoinstall folder, you can either tap on the program inside the Autoinstall folder or perform
a hard reset and the program will install as part of the regular Autoinstall; see
hard reset erases RAM data! For more information, see
After installation on the terminal is complete, tap Start > Programs and the program and its icon appears on the Programs
screen. Tap it to open the program.
6 - 4
Autoinstall
Hard Reset (Cold Boot) on page
Dolphin® 9500/9550 Mobile Computer User's Guide
on page 2-10. Remember, a
2-12.