Aspect Ratio - Barco CineVERSUM 110 Owner's Manual

How to change the Noise reduction ?
1. Press MENU to activate the menu bar. (image 8-11)
2. Press → to select the Image item.
3. Press ↓ to pull down the Image menu.
4. Use ↑ or ↓ to select settings.
5. Press → to pull down the menu.
6. Use ↓ or ↑ to select Noise reduction.
7. Press ENTER .
A slider box appears
8. Use ← or → to change the noise level.
The higher the value, the higher the noise reduction.
Or,
click in the input box and enter the desired value with the numeric keys.
Image 8-11

8.3 Aspect ratio

Aspect ratio is greyed out when the Full Screen Representation function in Display Setup is switched ON or
when the Show Native Resolution function in Image is switched ON.
What can be done ?
The aspect ratio setting forces the projector to project an image using a defined aspect ratio
Aspect ratio Description
Auto Calculates an aspect ratio based on the information stored in the images files.
4:3 Standard television format
16:9 Wide screen television format / anamorphic format
5:4 Workstation format
2.35 Cine Scope 35 mm
2.88
1.78 Wide screen television format / anamorphic format
R5976697 CINEVERSUM™ 110 12/05/2004
8. Image Menu
67