3. CONNECTIONS
Overview
•
Power connection
•
Input source connection
•
5-Cable input
•
Composite Video Input
•
S-Video input
•
Digital Visual Interface (DVI) input
•
Computer input (RGB analog)
•
Serial Digital Interface
•
RS232 IN connection
•
Extended configuration
3.1 Power connection
3.1.1
Supplied Power Cords
The following power cords are added to the product
In the package of each product, two power cords are added, one with a plug shape, reference standard ANSI C73.11, and one with
a plug shape, reference CEE (7).
Image 3-1
Power cord ANSI (L-shaped socket) for CineVERSUM™ 110
ANSI 73.11
American power plug to connect the power cord to the wall outlet.
CEE7
European power plug to connect the power cord to the wall outlet.
3.1.2
Power Connection CineVERSUM™ 110
AC Power Cord connection
Use the supplied power cord to connect the CineVERSUM™ 110 to the wall outlet. First, remove the back cover (1) (turn the quarter
turn fastener a quarter turn counterclockwise to unlock cover) and the power input cover (2) to allow the power plug insertion. Then,
plug the female power connector into the male connector at the rear of the unit. Make sure that the power plug is firmly inserted into
the AC socket and the power cable routed from the bottom side.
R5976697 CINEVERSUM™ 110 12/05/2004
Image 3-2
Power cord CEE (L-shaped socket) for CineVERSUM™ 110
3. Connections
21