Projector Configuration - Barco CineVERSUM 110 Owner's Manual

Image 2-1
Air flow, safety area

2.4 Projector Configuration

Which configuration can be used?
The projector can be installed to project images in four different configurations:
• Front/table
• Rear/table
• Front/ceiling
• Rear/ceiling
Positioning the projector
The projector should be installed perpendicular to the screen on a distance PD and water leveled in both directions. The mounting
positions in the following image is shown for a nominal lens position. The drawing is given for a ceiling mounted projector. The same
is valid for a table mounted projector.
R5976697 CINEVERSUM™ 110 12/05/2004
2. Installation Guidelines
11