Phase; Noise Reduction - Barco CineVERSUM 110 Owner's Manual

8. Image Menu
8.2.7

Phase

About Phase adjustment
When displaying computer patterns or graphics (RGB or YUV signals) which are very detailed (tilting, vertical stripes, etc. ), jitter
in picture (mis-sampling) may occur, causing horizontal stripes in portions of the screen. When this jitter occurs, adjust 'Phase' for
optimum image.
Image 8-9
Jittering on image
How to change the Phase ?
1. Press MENU to activate the menu bar. (image 8-10)
2. Press → to select the Image item.
3. Press ↓ to pull down the Image menu.
4. Use ↑ or ↓ to select settings.
5. Press → to pull down the menu.
6. Use ↓ or ↑ to select Phase.
7. Press ENTER .
A slider box appears.
8. Use ← or → to change the Phase and refine the jitter.
Or,
click in the input box and enter the desired value with the numeric keys.
Note: Don't mix up with wrong number of total pixels. If the jitter doesn't disappear with the phase adjustment, check the total
number of pixels. (Best image = pixel on pixel off pattern. For example: shut down screen of a PC)
Image 8-10
8.2.8

Noise reduction

About Noise reduction
Reduces noise and pixel jitter in all video sources.
66 R5976697 CINEVERSUM™ 110 12/05/2004