Installation Requirements And Attention Points - Barco CineVERSUM 110 Owner's Manual

1
2
Image 2-3
Lens shift
1 Vertical lens shift
2 Horizontal lens shift

2.5 Installation requirements and attention points

Overview
• Position the projector perpendicular to the screen and leveled to achieve an optimal image. An inclination of the projector is
allowed but limited due to the maximum keystone correction range.
• A swing of the projector is limited to 10° in both directions (due to the lamp position in the projector).
• The projector lens should be centered horizontally in the middle of the screen (Vertical and Horizontal shift of the lens built-in).
• Position the screen so that it is not in direct sunlight or room light. Light falling directly onto the screen washes out the colors,
making viewing difficult. Close the curtains and dim the lights when setting up the screen in a sunny or bright room.
• A polarizing screen cannot be used with this projector.
C
AUTION
10 °
Image 2-4
Projector swing angle
1 Table installed projector
2 Ceiling mounted projector
R5976697 CINEVERSUM™ 110 12/05/2004
Optical Axis Projector Lens
Optical Axis Projector Lens
:
The maximum mounting swing angle for the projector is 10°.
1
10 °
16
9
16
9
10 °
2
2. Installation Guidelines
10 °
13