Identification - Barco CineVERSUM 110 Owner's Manual

Image 7-4
Standby timer
Enabled
Disabled
Countdown to
Image 7-5

7.5 Identification

The projector's identification screen
The identification screen displays the projector's main characteristics
These are:
• Projector type
• Projector address
Software version controller unit
•
• Serial number of projector
How to display the identification screen ?
1. Press MENU to activate the menu bar.
2. Press → to select General.
3. Press ↓ to pull down the General menu.
4. Use ↑ or ↓ to select Identification. (image 7-6)
5. Press ENTER to activate the function.
The Identification screen will be displayed. (image 7-7)
6. Press MENU or BACK to exit or to go back to the previous menu
Image 7-6
Identification
Type
Address
Software
RS232 baudrate
Serial number
Image 7-7
R5976697 CINEVERSUM™ 110 12/05/2004
0 sec
CineVersum
5
01.00
115200
1234567
7. General Menu
57