Orientation; Language - Barco CineVERSUM 110 Owner's Manual

14. Installation menu

14.3 Orientation

Projector orientations
Depending on how the projector is oriented, the projector's internal settings have to be adapted. See also Chapter "Installation",
"Orientation".
How to change the orientation ?
1. Press MENU to activate the menu bar.
2. Press → to select the Installation item. (image 14-10)
3. Press ↓ to pull down the Installation menu.
4. Use ↑ or ↓ to select Orientation.
5. Press → to pull down the menu.
6. Use ↓ or ↑ to select the desired orientation.
7. Press ENTER to confirm.
The projection is adapted and a white bullet shows the active configuration.
Image 14-10

14.4 Language

List of languages
The list of selectable languages depends on the software of the projector.
Standard available languages:
• English
• French
• German
• Spanish
How to change the Language ?
1. Press MENU to activate the menu bar.
2. Press → to select the Installation item. (image 14-11)
3. Press ↓ to pull down the Installation menu.
4. Use ↑ or ↓ to select Language.
5. Press → to pull down the menu.
6. Use ↓ or ↑ to select the desired language.
7. Press ENTER to confirm.
The language is adapted and a white bullet shows the active configuration.
124 R5976697 CINEVERSUM™ 110 12/05/2004