S-Video Input - Barco CineVERSUM 110 Owner's Manual

How to select a Composite Video Input ?
1. Press 3 on the RCU
Note: Another way for selecting this input is via Source on the local keypad or via the Menu.
The projector allows the input of more composite video signals (up to 7 composite video signals) when using
the 5 cable input in extended configuration. Press 3 to browse through the possible video sources.

3.5 S-Video input

Input specification
R/PR G/Y B/PB
DVI
Image 3-8
S-Video indication
Pin configuration 4 pin connector
2
4
3
1
Image 3-9
For S-Video
pin 1 : earth (ground) luminance
pin 2 : earth (ground) chrominance
pin 3 : luminance signal (Y) 1Vpp ±3dB
pin 4 : chrominance signal (C) 300mVpp
Chrominance
The color component of a video signal that includes information about tint and saturation.
Luminance
The component of a video signal that includes information about its brightness.
Which signal can be connected ?
Standard S-Video (S-VHS) with separate Y (luma) and C (chroma) signals.
In extended mode also Composite video can be connected to the S-Video plug.
R5976697 CINEVERSUM™ 110 12/05/2004
Hs/Cs Vs VIDEO
ANALOG RGB RS 232 C
SDI
IN
S-VIDEO
R.C.
SDI
OUT
For Video
pin 1 : earth (ground) video Y
pin 2 : earth (ground) video C
pin 3 : video Y signal
pin 4 : video C signal
3. Connections
25