Using Account Codes - Inter-Tel INT4000 User Manual

U A
SING CCOUNT
If your telephone system is programmed to use the Station Message Detail Recording
(SMDR) feature, you might be required to enter account codes when you place a call.
These codes add information to telephone record reports that the system will periodi-
cally print.
There are three types of account codes:
• Standard account codes are automatically entered into the SMDR report when-
ever you place a call.
• Forced account codes must be dialed before you can place an outside call.
• Optional account codes can be entered at any time during a call.
NOTE:
Your System Administrator can tell you which types of account codes are used
on your telephone system.
To enter an optional account code:
Press
1.
Enter the optional account code. If the account code is not immediately accepted,
2.
press
To set an account code for all calls placed from your endpoint:
Dial
3
accepted, press
until it is disabled.
To disable the code:
Dial
3 9
®
Inter-Tel INT4000 User Guide
C
ODES
and
SPCL
3 9 9
.
#
and then the account code. If the account code is not immediately
9 1
. This code will be used for all calls made from your endpoint
#
and press .
1 #
.
63