Using A Headset - Inter-Tel INT4000 User Manual

U H
SING A EADSET
With an electret headset, you can talk on the endpoint handsfree, without using your
speaker and microphone.
NOTE:
If your headset has a power-saver mode, make sure the System Administrator
has the Headset Connect Tone flag enabled in the telephone system. If this flag is not
enabled, you may miss the first few seconds of incoming calls.
To connect a headset:
Insert the headset plug into the vacant handset jack.
1.
Enter the Headset On feature code (
2.
code (
To disconnect a headset:
Plug the coiled handset cord into the vacant jack.
1.
While on-hook, enter the Headset Off feature code (
2.
On/Off feature code (
36
). The display shows HEADSET MODE ON.
3 1 7
3 1
) or the Headset On/Off feature
3 1 5
3
). The display shows HEADSET MODE OFF.
7
) or the Headset
1 6
®
Inter-Tel INT4000 User Guide