R
N
EDIALING A
Although most endpoints redial the last number dialed, your System Administrator
can program your endpoint to redial the last number saved.
To use the Last Number Dialed feature (if enabled):
Press
REDIAL
To use the Last Number Saved feature (if enabled):
•
To save the last number dialed: While the endpoint is idle or while listening to
intercom dial tone, press
•
To redial the saved number: After selecting a line, press
selected automatically, and the number is dialed.
NOTE:
If there is no redial number available, the display shows NO NUMBER TO
DIAL.
D
I
ISPLAYING
NFORMATION ON
Your INT4000 has two lines of display where you can view information, such as the
date and time or the outside party's name/number.
Date, Time, Name, and Extension Number
You can temporarily display the system date and time, your username, and your
extension number at any time.
To show the date and time display (while on a call, in DND, etc.):
Press
SPCL
Outside Party's Name/Number
If you are currently connected to an outside caller with Caller ID, you can toggle
between displaying the caller's name and number.
To show the outside party's name/number:
Press
SPCL
NOTE:
If there is no outside party name available, the display shows CANNOT
ACCESS FEATURE.
®
Inter-Tel
INT4000 User Guide
UMBER
. A line is selected automatically, and the number is dialed.
REDIAL
and
.
3
0
0
and
.
3
7
9
.
Y
E
OUR
NDPOINT
. A line is
REDIAL
35