Inter-Tel INT4000 User Manual page 70

To store a number in a Speed-Dial location:
Dial
1.
Enter the location code 0-9 to be programmed.
2.
Enter the desired name for the speed-dial number, as described below:
3.
•
Remain in alphanumeric mode: Press the dialpad buttons to enter the desired
characters. (Refer to the chart on
pressed determines which character is entered. For example, 533266 enters
"JEAN." When adjoining characters are located under the same button, press
FORWARD once to advance to the next character. For example, 66 FWD
6667776 enters "NORM." (Note that letters correspond to the letters printed
on dialpad buttons 2-9.) Press FORWARD twice to leave a space. Press
BACKSPACE to backspace.
NOTE:
button (feature code 314) on your endpoint. Refer to Programming Your Fea-
ture Buttons section on
SPACE button. Also to use the FORWARD, PREVIOUS, NEXT, or MSG
button, your System Administrator must program them in Database Program-
ming.
•
Press
Dial the extension number or telephone number to be stored.
4.
•
Change to numeric mode: Press MSG and then press the dialpad buttons to
dial the desired numbers. Press
FORWARD to leave a space, or BACKSPACE to backspace.
NOTE:
up and release), or a pause, press
pound, three times for a hookflash, or four times for a pause. (Each pause or
hookflash counts as one digit.) You can enter more than one special character
in a row by pressing
•
Press
NOTE:
To dial outside telephone numbers without first selecting an outgoing line, enter
a line access code (such as the Outgoing Call code "8") before the outside telephone
number.
58
.
3 8 3
To use the BACKSPACE button, you must pre-program the feature
to save the name.
#
If your number includes an asterisk, pound, a hookflash (a quick hang
FORWARD
to save the number.
#
page 65.) The number of times a button is
page 62
for details on how to program the BACK-
for a hyphen (-),
#
once for an asterisk, twice for a
SPCL
between the characters.
for a colon (:),
*
®
Inter-Tel INT4000 User Guide