Display - Inter-Tel INT4000 User Manual

In addition to the buttons identified in the preceding table, your endpoint has a Spe-
cial button (
may need to press this button before you dial a feature code.
NOTE:
Because the telephone system allows customized feature buttons, your end-
point may have been reprogrammed so that the feature buttons do not match those
described in this guide.
ALSO: To use the BACKSPACE button, you must pre-program the feature button (fea-
ture code 314) on your endpoint. Refer to Programming Your Feature Buttons section
page 62
on
FORWARD, PREVIOUS, NEXT, or MSG button, your System Administrator must pro-
gram them in Database Programming.

Display

Your INT4000 has two lines of display with 16 characters per line. When your end-
point is idle, this display shows your extension number, your username, the time of
day, and the date. At other times, it may display reminder messages, Do-Not-Disturb
(DND) messages, numbers dialed, call sources, elapsed time of calls, current call
costs, error messages, etc.
Because the display can only support 16 characters, you may see a few abbreviations.
The most commonly used abbreviations are provided in the table below.
®
Inter-Tel INT4000 User Guide
). Depending on how your telephone system is configured, you
SPCL
for details on how to program the BACKSPACE button. Also to use the
ABBREVIATION
ACCT CODE Account Code
CNF Conference
DEST Destination
DIR Directory
DND Do-Not-Disturb
EXT Extension
MSG Message
RCL Recall
SPKR Speaker
SPKRPHN Speakerphone
STN SPD Station Speed Dial
SYS SPD System Speed Dial
TFR Transfer
TG Trunk Group (a group of outside lines)
TRNK Trunk (an outside line)
WORD/PHRASE
5