Programming Remote Feature Access; Remote Access Password - Inter-Tel INT4000 User Manual

P
ROGRAMMING
If you are away from your desk and forgot to put your endpoint in DND, don't worry.
With the Remote Feature Access, you can place your endpoint in DND or forward
calls from any other endpoint on the system. And, if you have a special dial-up line,
you can access your endpoint features from an outside line.

Remote Access Password

Before you use Remote Feature Access, you should program a password, as described
below.
To change the password from your endpoint:
Dial
1.
Enter your current password, followed by
2.
NOTE:
Enter the new password followed by
3.
Enter the new password again for verification followed by
4.
firmation tone.
To change the station password using remote programming, see the following section.
68
R F
EMOTE EATURE
.
3 9 2
Your extension number is your password at default.
A
CCESS
.
#
.You hear a confirmation tone.
#
#
Inter-Tel
. You hear a con-
®
INT4000 User Guide