Loudspeaker System Adjustment - Tannoy KINGDOM ROYAL Manual

TERMINATION PANEL
LINK WIRES REMOVED
BI-WIRE CONNECTION
LOUDSPEAKER SYSTEM
ADJUSTMENT
Each loudspeaker is fitted with two
controls located on the front baffle
beneath the grille. These high current
switch blocks are labelled DUAL
CONCENTRIC HF ENERGY and
SUPERTWEETER ENERGY. They can
be used to compensate for the varied
+
L
acoustic characteristics of listening
POWER AMPLIFIER
rooms. The loudspeaker has been
designed to sound neutral with these
controls in the 0dB or middle positions.
TO 'GROUND' OR
'EARTH' CONNECTION
The controls should be adjusted with
ON AMPLIFIER (OPTIONAL)
any amplifier tone controls in the 'flat'
or uncompensated position.
TO RIGHT
SPEAKER
- + -
R
48 48
The ENERGY controls have five
positions. They allow the output of
the Dual HF compression drive unit
and SuperTweeter to be increased
TM
or decreased from the linear or
'flat' position in 1.5dB steps, as
indicated below.
The adjustment frequency range for the
Dual HF is between 700Hz and 17kHz,
while the SuperTweeter adjustment
TM
range is from 17kHz upwards.