Fitting The Loudspeaker Assembly; Fitting The Grille - Tannoy CMS 1201DC Operation Manual

Professional loudspeakers

Hide thumbs Also See for CMS 1201DC:

Table of Contents

4. Installation Guide

4.5. Fitting the loudspeaker assembly

Mounting of the loudspeaker assembly to the pre-installed back-can is a one man job thanks to the common

sense design approach. One edge of the baffle clips onto the steel box to hold it in place while the installer

secures the assembly in place. Connection is simple via terminal barrier strips inside the can, easily accessible

via 20 mm (0.79") and 29 mm (1.14") conduit knockouts on all five sides of the can. Saving time and manpower

during installation has been a driving factor behind the design of the CMS 1201 system.

Baffle assemble can be hooked onto the back can with care.

CMS 3.0 Series Operation Manual rev 3.0.0

Table of Contents