Chapter 1 Introduction; Hardware Features - Allied Telesis AT-IFS802SP/POE Installation And User Manual

6

Chapter 1 Introduction

The 8 10/100TX + 2 10/100/1000T/Mini-GBIC Combo with 8 PoE Injectors Managed Industrial Switch is
a cost-effective solution and meets the high reliability requirements demanded by industrial applications.
Using fiber port can extend the connection distance that increases the network elasticity and performance.
Besides, the industrial switch provides the PoE function for kinds of Powered Devices to receive power as
well as data over the RJ-45 cable.

1.1 Hardware Features

Standard
Switch
Architecture
Transfer Rate
Packet Buffer
MAC Address
Flash ROM
DRAM
Connector
IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX/ FX
IEEE802.3ab 1000Base-T
IEEE802.3z Gigabit fiber
IEEE802.3x Flow Control and Back Pressure
IEEE802.3ad Port trunk with LACP
IEEE802.3af Power over Ethernet
IEEE802.1d Spanning Tree/ IEEE802.1w Rapid Spanning Tree
IEEE802.1p Class of Service
IEEE802.1Q VLAN Tag
IEEE 802.1x User Authentication (Radius)
IEEE802.1ab LLDP
Back-plane (Switching Fabric): 5.6Gbps
Packet throughput ability(Full-Duplex): 8.3Mpps @64bytes
14,880pps for Ethernet port
148,800pps for Fast Ethernet port
1,488,000pps for Gigabit Fiber Ethernet port
1Mbits
8K MAC address table
4Mbytes
32Mbytes
10/100TX: 8 x RJ-45
10/100/1000T/ SFP Combo: 2 x RJ-45 + 2 x
100/1000 SFP sockets
RS-232 connector: RJ-45 type
AT-IFS802SP/POE(W)-80 User Manual