User Authentication; Port Statistics - Allied Telesis AT-IFS802SP/POE Installation And User Manual

40

6.12 User Authentication

Change web management login user name and password for the management security issue.
• User name
• Password
: Type in the new password (The default is 'root')
• Confirm password
• And then, click

6.13 Port Statistics

The following chart provides the current statistic information which displays the real-time packet
transfer status for each port. The user might use the information to plan and implement the network,
or check and find the problem when the collision or heavy traffic occurs.
• Port
: The port number.
• Type
: Displays the current speed of connection to the port.
• Link : The status of linking—'Up' or 'Down'.
• State : It's set by Port Control. When the state is disabled, the port will not transmit or receive
any packet.
• Tx Good Packet
• Tx Bad Packet
oversize, CRC Align errors, fragments and jabbers packets) via this port.
• Rx Good Packet
• Rx Bad Packet
oversize, CRC error, fragments and jabbers) via this port.
• Tx Abort Packet
• Packet Collision
• Packet Dropped
• Rx Bcast Packet
• Rx Mcast Packet
• Click
Apply
: Type in the new user name (The default is 'root')
: Re-type the new password
Apply
User Authentication interface
: The counts of transmitting good packets via this port.
: The counts of transmitting bad packets (including undersize [less than 64 octets],
: The counts of receiving good packets via this port.
: The counts of receiving good packets (including undersize [less than 64 octets],
: The aborted packet while transmitting.
: The counts of collision packet.
: The counts of dropped packet.
: The counts of broadcast packet.
: The counts of multicast packet.
button to clean all counts.
AT-IFS802SP/POE(W)-80 User Manual