Wired Connection To A Network - Beward N300 Installation & User Manual

Step 3: attach the camera to the bracket, adjust the tilt angle and fasten the camera (Pic.
4.2).

4.4. Wired Connection to a Network

Step 1: provide the camera with power using the included 5 V, 1 A power supply.
Step 2: use the supplied RJ45 cable to connect the camera to the network (a LAN port of
the router).
You can purchase a network cable separately or if you have the materials, tools and skills,
you can make a network cable by yourself.
A straight RJ-45 cable (UTP category 5e)
The table below shows an example of a patch cord to connect the camera to a computer or
a network switch.
One end
N300 Installation User Manual
Chapter 4. Installing the Camera and Cables' Connecting
1: White and orange
2: Orange
3: White and green
4: Blue
5: White and blue
6: Green
7: White and brown
8: Brown
Pic. 4.2
Other end
1: White and orange
2: Orange
3: White and green
4: Blue
5: White and blue
6: Green
7: White and brown
8: Brown
11