Step 9, Install Framed Panels - Monogram ZIRP360NXARH Installation Instructions Manual

Installation Instructions
[STEP 9] INSTALL FRAMED PANELS
(TRIMMED MODELS ONLY)
Right hand models shown. Use the same instructions
for left hand models.
IF YOU ARE INSTALLING OVERLAY PANELS,
GO TO STEP IOA.
!! useFr0ntH
to SecureTrim
Rear Holes
to Secure Handle
Install Door Panel:
• Open the door to 90 °. Remove the 6 Phillips head screws
from the door handle.
• Remove the handle. Retain all screws.
• Remove the 6 screws holding the trim, lift off the trim.
Retain the screws.
• Slide the framed panel into the door trim.
Handle
Trim
Door Trim
Door
k\\\\\\\\\\\\\\\\\\\%/
Standardsuppliedhandleshown
in 1/4" panel position.
• There are two sets of holes in the handle side trim.
Replace the handle side trim by installing the original
screws in the FRONTscrew holes.
• Secure the handle to the door using the REAR
screw holes.
18