2.4
Device Setup & Configuration
The Advantech Navigator program is a utility that allows you to set up, configure and
test your device, and later stores your settings on the system registry. These settings
will be used when you call the APIs of Advantech Device Drivers. Take the following
PCIE-1824 details as an example.
Setting Up the Device
1.
To install the I/O device for your card, first run the Advantech Navigator program
(by accessing Start/Programs/Advantech Automation/Navigator for DN4).
2.
You can then view the device(s) already installed on your system (if any) in the
Installed Devices list box. If the software and hardware installation are com-
pleted, you will see PCIE-1824 card in the Installed Devices list.
PCIE-1824 User Manual
Figure 2.1 PCIE-1824 Device Settings
10