Table of Contents
Advertisement
16
16
6. If you're going to be using a standard phone, plug it into the green phone
socket on the back of your Hub.
Find out more
To find out more about making calls with this service, see page 22.
Hub features
Hub Manager
Your Hub is like a computer. It has its own software running, which controls
how it works and what it does.
You can find technical help and also make changes to the way your Hub
works by using the Hub Manager.
To access Hub Manager, click its desktop icon or open your web browser and
type bthomehub.home in the address bar.
You may need a username and password to access some of your Hub's
advanced settings.
Hub Manager default username and password
Username: admin
Buttons on the side of your Hub
Wireless Association button
Sets your Hub to wireless association mode. Press and hold this button until
the Phone and Wireless lights flash orange. This button is used to connect
a BT Hub Phone to your Hub. Please refer to the BT Hub Phone userguide for
more information.
Reset to Defaults button
To reset your Hub to its factory setting:
1. find the recessed Reset to Defaults button on the side of your Hub
2. press and hold the button for 2-3 seconds until your Hub lights
go out
3. stop pressing and wait for the Hub's Broadband light to glow
green – this may take several minutes
Remember: resetting your Hub means you have to activate your
BT Broadband Talk service again. See page 15.
Restart button
Can often solve a broadband connection problem. To restart your Hub,
simply press and release the Restart button at the side of the Hub.
17
Password: admin
Advertisement
Table of Contents
