3-4 IP Filter
When this IP camera is directly connected to Internet and not protected by firewall,
this function acts like a mini built-in firewall to protect the safety of this IP camera
and avoid attacks from hackers.
Here is the description of every setup item:
Item
Description
Enable Filter
Check this box to enable IP address filter, uncheck this box to
disable this function.
Accepted IP
It lists all IP addresses that can build connections to this IP
list
camera. If you want to remove a set of IP addresses from the list,
click on the IP address and click 'Remove' button.
IP Address
Input the starting and ending IP address for which you wish to
accept connections. IP camera will only accept connections
(Accepted IP
established from these IP addresses.
list)
If you want to specify one IP address only, input the same IP
address in both fields.
Click 'New' button to add IP address into accepted IP list.
37
DG-SC5800PI User Manual