Digisol DG-SC5800PI User Manual page 82

Check 'Enable Camera' to enable this camera in SKYROS iView. If the IP camera
you wish to add is not located on local area network, you have to input the details of
IP camera manually:
Input the network settings of IP camera, including IP address, HTTP port number and
user name / password.
After you find an IP camera add it manually, click 'Add to list' button and the IP
camera will be listed in SKYROS iView as shown below:
Every IP camera has a check box, indicating if it is enabled. If a camera is not
enabled, it will not be displayed in SKYROS iView's video view.
82
DG-SC5800PI User Manual