Table of Contents
Advertisement
Power Line
Select the frequency of power line of the place you're using this
Frequency
IP camera. This will help to reduce the flicker of certain lights in
the image.
Condition
Select the condition that you'll be using this IP camera from
(AWB)
dropdown menu.
- Auto: IP camera will adjust its parameters automatically.
- Night: You'll be using this IP camera in dark places where
- Outdoor: Enable this condition on an IP camera for Outdoor
-Tungsten: To be used for yellow/ orange lighting conditions.
TV Out
Click "Enable" box to enable its "VIDEO OUT" function for
connections and video sending to TV monitors or DVRs.
IR-cut
An IR-cut filter is built in this IP camera to reduce the effect of
(Day/Night)
IR lights (which will change the color of the image and make it
look different than what you see through your eye), and most of
IR lights are coming from sunlight.
You can select the behavior or IR-cut filter:
‐
‐
‐
Day
IR-cut filter will only be switched on when there is sunlight. You
can define the starting and ending time when IR-cut filter should
be switched on by selecting 'Schedule' and define starting and
ending time by dropdown menu.
When you finish with above settings, click 'Apply' button to save changes.
lights are insufficient.
installation.
Auto: IR filter will act automatically. If you don't know if
you should use IR filter, select this option.
Always ON (B/W): IR filter is always on.
Always OFF (Color): IR filter is always off.
40
DG-SC5800PI User Manual
Advertisement
Table of Contents
