Digisol DG-SC5800PI User Manual page 84

The description of every item is listed as follows:
Item
Select Camera
Record Mode
Motion Detection
Setting
Please select an IP camera from the list to setup its recording
behavior. SKYROS iView will attempt to connect to selected
IP camera, if it's not connectable, you will receive an error
message later.
You can decide the recording behavior for this IP camera:
 Monitor only, not record: SKYROS iView will not
record video of this IP camera.
 Round The Clock: SKYROS iView will record
video of this IP camera all the time.
 Motion Detection: SKYROS iView will only record
video when motion is detected.
 Apply to All Cameras: Click this button to apply
current record control settings to all IP cameras on the
list.
Sets motion detection area
camera from the list, and
pattern:
Use the mouse to click blocks on the grid pattern to assign the
areas you wish SKYROS iView to detect / ignore motion.
SKYROS iView will detect motion for areas which are NOT
covered by blocks only.
T o add or erase blocks:
84
DG-SC5800PI User Manual
Description
and sensitivity. Please select an IP
its video will appear with a grid