Digisol DG-SC5800PI User Manual page 52

Item
Enable Setting
Title
Motion Detection
Digital Input 1
Enable Schedule
Time
Enable FTP
Enable EMAIL
Enable Samba
(Net Storage)
Enable SD CARD Check this box and IP camera will save file on SD card when
Trigger digital
output for xx
second(s).
When you finish with the above settings, click 'Apply' button to save changes.
Description
Check this box to enable this event. If you just want to disable
this event temporarily, you can uncheck this box to disable the
event without deleting it.
Input any description text for this event so you can identify it
quickly. You can use alphabets, numbers and symbols
include:!$-.@^_~ (Note: no spaces allowed).
Check this box and this event will be activated when one of the
motion detection window detects motion.
Check this box and this event will be activated when digital
input 1 signal is high or low (select from dropdown list).
Check this box and this event will be activated when
designated weekday and time is reached.
You also have to check weekday box, and select time from
dropdown list. If you select 'Always' as time, this event will
be activated during all the day.
Check this box and IP camera will save file on FTP server
(refer to 'FTP Server' setting in 'Event Server' tab) when this
event is activated.
Check this box and IP camera will send an Email to designated
recipient address (refer to 'SMTP Server' setting in 'Event
Server' tab) when this event is activated.
Check this box and IP camera will save file on samba server
(refer to 'Samba Server' setting in 'Event Server' tab) when
this event is activated.
this event is activated. A working SD card must be inserted
into IP camera in advance.
Check this box and IP camera will trigger digital out to 'high'
state for xx seconds when this event is activated, where 'xx'
seconds must be defined by the dropdown list.
52
DG-SC5800PI User Manual