Table of Contents
Advertisement
DI/DO PIN ASSIGNMENT
Item
Description
1
Blue, Sensor IN1, for alarm input, DV3.3Volt level allowed.
2
Yellow, RS485 D-
3
Orange, RS485 D+
4
Black, GND
5
Green, Alarm out1, DV3.3Volt level allowed.
6
DC12Volt/2A input
7
Reset Button to be used when the IP camera is not functioning properly, You can
press and hold this button till the power LED goes off to clear all settings of IP
camera, including administrator password, then the IP camera will download
default settings automatically.
8
Audio output
9
Audio input
10
Network, RJ45 connector, two LED index, orange color is power index, green is
network index.
11
TV output, BNC connector.
Top Portion of the camera
Note: The SD card slot is available in the IP camera.
Open the top portion of the camera as shown in the
figure above. The slot as highlighted in the figure will be
visible.
14
DG-SC5800PI User Manual
Advertisement
Table of Contents
