Daylight Saving - Digisol DG-SC5800PI User Manual

Here is the description of every setup item:
Item
Host Name
Indicator LED
Timezone

Daylight Saving

Keep the current date and time
Synchronize with computer time
Synchronize with NTP Server
Set Manually
When you finish with above settings, click 'Apply' button to save changes.
Input the IP camera's hostname here, it can be any
meaningful words or characters that will help you to
identify this IP camera. You can use IP camera's
installation location as host name, and this will help
you to identify IP camera when you have many IP
cameras installed.
The LED lights located at the back of IP camera is
switched on by default. But, if you don't want other
people to know the status of this IP camera (so they
will know this IP camera is operating etc.), you can
select 'Off' and LED lights will be switched off.
Select the time zone of residence from dropdown
menu to keep correct date and time.
If the area you live uses daylight saving, check this
box; otherwise do not check this box to keep correct
time.
Select this option and date / time setting will not be
changed when you click 'Apply' in the page.
You can check 'Camera Date and Time' item in this
page to know IP camera's current date and time
setting.
Select this item and IP camera will use your
computer's time as its time.
Select this item and IP camera will keep its date and
time setting synchronized with specified time server
(NTP server). Please input NTP server's IP address or
host name in 'NTP Server Address' field, and select
time update interval from 'Update Interval' dropdown
menu.
Please note that if this IP camera can't access
Internet, you must have a time server on local area
network, or set the time manually.
Set IP camera's date and time manually. Please set
current date and time by 'Date' and 'Time' dropdown
menu.
30
DG-SC5800PI User Manual
Description