Download Print this page

4-Wire Cord Connections - Haier CRDE400AW User Manual

Haier electric dryer user manual
Hide thumbs

Advertisement

English

4-Wire Cord Connections

Green Ground
Screw
Green Neutral
Ground Wire
Red
Power Cord
1. Remove the screws securing the terminal block access cover and the strain
relief mounting bracket located on the back of the dryer upper corner .
2. Install a UL approved strain relief into the power cord entry hole of the
mounting bracket . Finger tighten the nut only at this time.
3. Remove the green neutral ground wire from the green ground screw located
above the terminal block.
Typical Conductor
Receptacle
Typical 4
Conductor Cord
11
11
Green Power Cord
Ground Wire
Strain Relief
Mounting Bracket
Brass Terminal
Block
Terminal
Black
Tighten Nut to
These Threads
Nut
Black 240V
White Neutral
Red 240V
Green Ground

Advertisement

loading

  Also See for Haier CRDE400AW

  Related Manuals for Haier CRDE400AW

This manual is also suitable for:

Crde200awRde200awRde400awRde400aw/rCrde400aw/r