Wire Cord Connections - Haier GDZ5-1 User Manual

GDZ5-1 manual 10/22/01 11:44 AM Pagel_l_\
4-WireCord Connections
green
green power cord silver terminal
ground wire
terminal block
green neutral
black
tighten nut to
these threads
power cord
strain relief
mounting bracket
1. Remove the screws securing the terminal block access cover
and the strain relief mounting bracket located on the back
of the dryer upper corner,
2. Install a U,L approved strain relief into the power cord entry hole
of the mounting bracket. Finger tighten the nut only at this time.
3, Remove the green neutral ground wire from the green ground
screw located above the terminal block,
Typical
Conductor
Receptacle
Typical ¢
4 Conductor
/
Cord
23
f
black 240V
white neutral
red 240V
"_ green ground
30 AMP NEMA 14-30 TYPE SRDT OR ST