Download Print this page

Haier CRDE400AW User Manual page 18

Haier electric dryer user manual
Hide thumbs

Advertisement

English
Various button initial status for "Normal program"
Cycle Signal
Wrinkle Care
Cycles
Nixie display
Temp
Sensor Dryness Level
Timed/Cycles
2. Press "Cycles" button to select a suitable full automatic cycle
The Normal program will be automatically selected after powering on. If other
full automatic program is desired, press "Auto-program Selection" button
until corresponding indicator turns on.
Initial status of various buttons when setting "Auto-program Selection".
Cycles
Wrinkle Care
Cycle Signal
Delay Start
Timed/ Cycles
Temp
Dryness Level
Notes: If "Customized" is selected, various buttons will indicate previous conditions
set by the user.
"Customized" function is a program designed to facilitate user's operation. It can
memorize programs defined by user himself and display the previous program
upon next application of this function.
Use details are as follows:
After powering on, press "Cycles" until "Customized" status, then set "Cycles" to
Timed Dry or Rack Dry, and set status of other buttons. Press "Start/Pause" button
or after half a minute, the program defined by user himself will be stored and
will be directly displayed upon next use.
Notes: Pressing "Sensor Dryness Level" button will be inactive during use of
"Customized" function.
17
Softer
Off
Normal
Indicate current program remaining time
High
More Dry
Auto-program
Customized
Normal
Heavy
Cycles
Cotton
Normal Heavy
Cotton
To be used together with reserve function, off if reserve is disabled
Indicate current selected program remaining time
Midium
High
High
Bulky Items
Permanent Press
Delicate
Delicate Permanent Press Bulky Items
Softer
Auto Dry
Low
Air Only(No Heat)
More Dry
High

Advertisement

loading

  Also See for Haier CRDE400AW

  Related Manuals for Haier CRDE400AW

This manual is also suitable for:

Crde200awRde200awRde400awRde400aw/rCrde400aw/r