Table of Contents
Advertisement
Load clothes into dryer
Auto Dry cycle and Timed Dry cycle
The appropriate load shall be 1/3 ~ 1/2 of the drum volume. Avoid too much load,
for a certain space is needed to allow clothes free rotation for uniform and wrinkle-
proof drying.
When drying big articles, only 2-3 pieces shall be loaded at a time and
supplemented with middle and small articles.
For elaborate clothes or less load, two towels without lint falling may be added to
get better drying and wrinkle-proof effects.
Do not excessively dry clothes to avoid wrinkles, shrinkage, roughness, electrostatic
chargesaccumulation and more lint.
Rack Dry cycle
This program is designed specially for articles like sport shoes. During drying
please make sure the clothes reliably stay on the rack with no risk of entangling
the agitation blade while drum is rotating.
Note: If drying rack is not in place, rolling inner tub could collid with
drying rack and causes damage to the dryer and drying rack.
Auto Dry cycle
Dry
Very
Cool down
More
High
Normal
Cycle completed
Medium
Less
Extend tumble
Low
DAMP
Air Only(No Heat)
Sensor
Dryness
Temp
Level
3
4
1. Press "Power On/Off" button to power on
Turn on the power switch, the computer board beeps once and the dryer transfers
from off status to the initial operating status (Normal program);
If no "Start/Pause" button is pressed in 5 min after powering on, it automatically
cuts off power and returns to off status;
It returns to off status immediately upon end of a cycle;
Whatever status the computer board is (start, pause, alarm etc.), Pressing
"Power On/Off" button will stop all operations and it enters off status.
Time Remaining
More Time
Less Time
Customized
Normal
Heavy
Permanent Press
Cycles
Cott on
2
Auto Dry
Bulky Items
Timed Dry
Rack dry
Cycle
Timed
Signal
Cycles
Delicate
5
English
On/Off
On
Louder
Start
Off
Softer
Pause
Off
Wrinkle
Care
6
7
Power
1
16
Advertisement
Table of Contents
