Electrical Connections; Requirements And Instructions - Haier CRDE400AW User Manual

Haier electric dryer user manual
Hide thumbs


Table of Contents

Electrical Connections

Requirements and Instructions

1. This appliance must be properly grounded. Electrical shock can result if the
dryer is not properly grounded. Follow the instructions in this manual for
Proper grounding.
2. Do not use an extension cord with this dryer. Some extension cords are not
designed to withstand the amounts of electrical current this dryer utilizes and
can melt, creating electric shock and/or fire hazard. Locate the dryer within
reach of the receptacle for the length power cable to be purchased, allowing
Some slack in the cord. Refer to the electrical requirements in this manual for
The proper power cord to be purchased.
3. A UL approve strain relief must be installed onto power cable. If the the strain
relief is not attached, the cord can be pulled out of the pulled out of the
dryer and can be cut by any movement of the cord, resulting in electrical
4. Do not use an aluminum wire receptacle with copper wired power cord and
plug (or vice versa). A chemical reaction occurs between copper and
aluminum and can cause electrical shorts. The proper wiring and receptacle
is a copper wired power cord with a copper wired receptacle.
Note: Dryers operating on 208 Volt power supply sill have longer drying times
than operation on 240 Volt power supply.
Danger: Improper connection of the equipment grounding conductor can
result in a risk of electrical shock. Check with a licensed
electrician if you are in doubt as to whether the appliance is
properly grounded.


Table of Contents

  Also See for Haier CRDE400AW

  Related Manuals for Haier CRDE400AW

This manual is also suitable for:


Table of Contents