Rev 2.4
About this Manual
This manual describes the installation and basic use of the Mellanox MTS3600 switch, which is
based on the InfiniScale IV InfiniBand switch device.
Intended Audience
This manual is intended for users and system administrators responsible for installing and setting
up the switch platforms listed above.
The manual assumes familiarity with the InfiniBand
Related Documentation
Additional Documentation available from Mellanox:
Table 2 - Reference Documents
Switch Firmware and
Firmware Update
Tools
Mellanox OFED
Stack for Linux
User's Manual
FabricIT Enterprise
Fabric Management
Software CLI User's
Manual
Mellanox Firmware
Tools (MFT)
User's Manual
Document # 2329
8
Mellanox Technologies
See
http://www.mellanox.com
Note that the Switch System described in this manual is based on Mellanox
Technologies' InfiniScale
See
http://www.mellanox.com
Click "Mellanox OpenFabrics Enterprise Distribution for Linux
(MLNX_OFED)"
Select the Linux User's Manual
The embedded OS and tools on the CPU in the management module is a
subset of the Mellanox OFED stack.
Talk to your Mellanox representative for information regarding licensing
and implementation of the FabricIT Enterprise Fabric Management Soft-
ware System.
The MFT (Mellanox Firmware Tools) package is a set of firmware tools.
The manual supplied with this package provides an overview of the firm-
ware its installation and replacement. The MFT can be downloaded with its
documentation at:
http://www.mellanox.com
®
Architecture Specification.
> Downloads > Firmware Tools.
®
IV switch device.
> Downloads > InfiniBand SW/Drivers,
> Downloads > Firmware Tools.