Mellanox Technologies InfiniScale MTS3600Q-1BNC User Manual page 19

• 8 pan head screws M6
rail
rail slide
Before you install your new MTS3600 switch, unpack the system and check to make sure that all
the parts have been sent, check this against the parts list. Check the parts for visible damages that
may have occurred during shipping.
Note: If anything is damaged or missing, contact your customer representative immediately.
Procedure
1. Place the ESD mat on the floor where you will be working and put on the ESD strap. Make sure
the ESD strap is touching your skin and that the other end is connected to a verified ground.
2. Choose which side of the switch you want even with the vertical rack support. Either the side
with the power supply units or the side with the IB connectors can be even with the vertical rack
support. The other side of the switch will be further inside of the rack.
Things to consider before choosing where to mount the rails and rail slides.
• 2 metal washers
Figure 7: Rack Installation Kit Parts
Mellanox Technologies
Rev 2.4
19