Mellanox Technologies InfiniScale MTS3600Q-1BNC User Manual page 17

2. Over-temperature
This equipment should not be operated in an area with an ambient tem-
perature exceeding the maximum recommended: 45°C (113°F). More-
over, to guarantee proper air flow, allow at least 8cm (3 inches) of
clearance around the ventilation openings.
3. Stacking the Chassis
The chassis should not be stacked on any other equipment. If the chassis
falls, it can cause bodily injury and equipment damage.
4. Redundant Power Supply Connection - Electrical Hazard
This product includes a blank cover over the space for the redundant
power supply. Do not operate the product if the blank cover is not
securely fastened or if it is removed.
5. During Lightning - Electrical Hazard
During periods of lightning activity, do not work on the equipment or
connect or disconnect cables.
6. Copper InfiniBand Cable Connecting/Disconnecting
Copper InfiniBand cables are heavy and not flexible, as such they should
be carefully attached to or detached from the connectors. Refer to the
cable manufacturer for special warnings and instructions.
7. Rack Mounting and Servicing
When this product is mounted or serviced in a rack, special precautions
must be taken to ensure that the system remains stable. In general you
should fill the rack with equipment starting from the bottom to the top.
8. Equipment Installation
This equipment should be installed, replaced, or serviced only by trained
and qualified personnel.
Mellanox Technologies
Rev 2.4
17