Restoring Factory Settings; Update Software - Troubleshooting - Tripp Lite 116 User Manual

4. Open the file.
5. Click Start. The Smart CAT5 Switch Update flashes the firmware. On
completion the firmware version number appears.
6. Check that the updated version number is correct by pressing
.

6.6 Restoring factory settings

You can restore the OSD to the factory settings from the Update software.
Note! All changes made (passwords, access rights, names etc.) will be
removed.
To restore the OSD factory settings:
Select Options/Advanced/Set default. The OSD returns to the factory default
settings.
(You can also restore the OSD from the OSD (F7), see page 19).

6.7 Update software - Troubleshooting

This section covers:
 Resetting the units
 Getting the current status
 Communication Error message
 Electricity failure
SMART CAT5 SWITCH – 108/116
Figure 30 Open box
37